2021 Marin Bikes Alpine Trail E2 M

2021 Marin Bikes Alpine Trail E2 M

Swipe to View More

Exterior Colors:

  • Year 2021
  • Make Marin Bikes
  • Model Alpine Trail E2
2021 Marin Bikes Alpine Trail E2 M

2021 Marin Bikes Alpine Trail E2 M

2021 Marin Bikes Alpine Trail E2 M

MOUNTAIN BIKING WITH A BOOST
  • BEYOND CAPABLE, BOTH UP AND DOWN, IN EVEN THE MOST CHALLENGING TERRAIN
  • MAXIMIZING FUN

The Alpine Trail E will take you further, faster, allowing you to tackle the most aggressive trails either up or down.

Features may include:
  • Shimano STEPS EP8 system and 630Wh battery
  • Fox 38/Float DHX2 Performance Elite suspension
  • Shimano XT/SLX 12-speed drivetrain w/10-51t cassette
  • Shimano SLX 4-piston disc brakes
  • Deity Ridgeline bar/Copperhead stem
  • SERIES 4 ALUMINUM FRAME

Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.

  • MULTITRAC SUSPENSION

The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills.

  • MIXED WHEEL SIZES

29” front and 27.5”+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5” x 2.8” rear setup adds playfulness and enhances acceleration and braking traction.

  • DROPPER POST OPTIMIZED

The modern day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, along with minimum insertion depths, so that riders of all sizes can get the proper extension needed.

F

Dimensions

Dimensions Stack: 622 mm | Reach: 465 mm | Headtube Angle: 78° | Seattube Angle: 78° | Toptube Effective: 597 mm | Bb Drop: 28 mm | Chainstay: 435 mm | Fork Offset: 44 mm | Seatpost Diameter: 30.9 mm
Length Headtube: 110 mm | Seat tube: 400 mm | Stem: 35 mm | Crank: 165 mm
Height BB: 340.5 mm | Standover: 681.4 mm
Width Handlebar: 780 mm
Wheelbase 1239 mm

Motor

Motor Power Shimano STEPS EP8 Drive Unit, 250W, 85Nm

Battery

Battery BT-8036, Internal 630Wh

Drivetrain

Drivetrain Derailleur Rear: Shimano XT 8100 12-Speed, SGS | Bottom Bracket:
Bicycle Crank Set: e13 e*Spec Plus Crank, 165mm Length with e13 e*Spec DM Chainring 38T, e13 Plus Chainguide, Aluminum Plate
Gear Shifter Lever: Shimano SLX 7100 12-Speed, I-Spec EV
Chain Type KMC E12S, E-Bike Specific Chain
Sprockets, Rear Cassette: Shimano SLX M7100, 12-Speed, 10-51T
Pedals Marin MTB Plastic

Chassis

Frame Type All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
Handlebars Deity Ridgeline, Stealth Finish, 35mm Clamp, 800mm Width
Handlebar Grips Marin Single Clamp Locking
Seat Type Post: X-Fusion Manic, 150mm, 30.9mm

Suspension

Front Fork Fox 38 Performance Elite, 160mm travel, 29" , 110x15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fox Fender
Rear Shocks Fox Float DHX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 205x65mm, Trunnion Upper Mount, 25mmxM8 Lower Mount, 350lb

Brakes

Brake System Type Shimano SLX Levers, I-Spec EV
Front braking system Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor
Rear braking system Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor w/ Speed Sensor

Wheels & Tires

Hub Type Rear: Shimano HB-MT510B, 148x12mm, Centerlock, Microspline Freehub Body | Front: Shimano MT-410B, 110x15mm, Centerlock Disc, 32H
Wheels Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width; Pinned Joint, Disc Specific, Tubeless Compatible
Front Tire Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO+, Tubeless Compatible
Rear Tire Maxxis Minion DHR II 27.5x2.8”, 3C Maxx Terra, EXO+, Tubeless Compatible

Features

Features Spoke: 14g Black Stainless Steel | Stem: Deity Copperhead 35mm, Black Ano | Headset: FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2” | Saddle: Marin E-MTB Saddle | Display: SC-E8000 Display | Display: SW-E7000 Left Hand Switch for Assist Mode Change | Extras: Shimano Left Hand Switch for Assist Mode Change, Shimano Battery Charger EC-E6002, Bolt-on Thru-Axle

Product Photography